SATA Schematics checklist
Reading time : 1 minute
Published on 21 Jun 2020 - Updated on 05 Dec 2020
| Document | Category | Item |
|---|---|---|
| Schematics | SATA | Check that SATA signals are connected to hardware capable Serdes port |
| Schematics | SATA | Check that there is a 10nF serial capacitor on each TX and RX SATA signal |
| Schematics | SATA | Check that HDD SATA are connected from fastest to slowest |
| Schematics | SATA | SATA Power P11 signal is grounded |
| Schematics | SATA | SATA Controller is set in AHCI mode |