CPU Schematics checklist
Reading time : 1 minute
Published on 16 Jun 2020 - Updated on 05 Dec 2020
Schematics Checklist
| Document | Category | Item |
|---|---|---|
| Schematics | CPU | Check that CPU hardware configuration is correct (frequency, cache, threads,…) |
| Schematics | CPU | UART debug connector is connected to first CPU Uart port |
| Schematics | CPU | UART connector reference is correct |
| Schematics | CPU | UART pinout is correct |
| Schematics | CPU | UART TX/RX signals have the right level |
| Schematics | CPU | UART TX/RX signals direction is correct |
| Schematics | CPU | UART connector reference is correct |
| Schematics | CPU | UART text is placed near connector |
| Layout | CPU | UART text is placed near connector |
| 3D Files | CPU | UART connector is easy to access |
| Schematics | CPU | JTAG pinout is correct |
| Schematics | CPU | JTAG connector reference is correct |
| Schematics | CPU | Check JTAG signals are correctly connected to CPU |
| Schematics | CPU | Check JTAG reset signal is correctly connected to system reset |
| Schematics | CPU | Check that JTAG TMS is connected on TMS_CPU (not TMS_CORE) |
| Layout | CPU | JTAG text is placed near connector |
| Schematics | CPU | JTAG text is placed near connector |